VP1
VP1
Vulcan VP1 is 100% GORE® fibre packing. This remarkable yarn is constructed from PTFE and Graphite intimately blended and locked and then treated with a high temperature, break-in lubricant. Vulcan VP1 is an outstanding packing for use in aggressive or arduous duties including the most difficult chemical environments. It is essentially chemically inert over the entire pH range.
The unique combination of locked Graphite and PTFE creates a yarn with very high thermal conductivity, that does not harden, shrink, swell or dry out and that is exceptionally smooth running with negligible shaft wear. User experience with G1 fibre has shown that, in practically all cases, greatly extended service life can be expected.
In order to obtain maximum benefit from this fibre, Vulcan VP1 is square inter-braided via a CROSS-LOCK® process. The construction of VP1 increases the durability of the packing and reduces the gland pressure required to perform a seal. Periods between gland maintenance and packing replacement are thus even further extended and Type VP1‘s CROSS-LOCK® braiding helps overcome extrusion problems, which can be the one negative of this fibre, particularly in lower quality braids.
In order to obtain maximum benefit from this fibre, Vulcan VP1 is square inter-braided via a CROSS-LOCK® process. The construction of VP1 increases the durability of the packing and reduces the gland pressure required to perform a seal. Periods between gland maintenance and packing replacement are thus even further extended and Type VP1‘s CROSS-LOCK® braiding helps overcome extrusion problems, which can be the one negative of this fibre, particularly in lower quality braids.
Features
- Chemically inert over the entire pH range
- High thermal conductivity
- Increase service life whilst minimising wear and gland adjustments
Operating Limits
- Pressure Rating: 120 Bar
- Rotary Speed: 25 m/s
- Temperature: -200˚C to +280˚C
- pH Range: 0 - 14
Limits are for guidance only. Product performance is dependent on materials and other operating conditions.
100% pure flexible expanded graphite yarns high Carbon content.
Compatible with media in the range pH 0-14, excluding strong oxidizing agents.
Negligible volatile content.
Low in extractable trace impurities such as chloride and sulphur.
For use wherever the value of the best quality and material packing can be realised. Since the actual purchase cost of a packing is typically only 3% of the true utilisation cost, Vulcan recommends this PTFE GRAPHITE packing for all possible applications. They will increase service life whilst minimising wear and gland adjustments, against nearly all media in static, rotary and reciprocating uses.
